FXBW Composite Rod-Shaped Suspension 11kV Insulator

Composite rod-shaped suspension insulator for high-voltage lines are suitable for use in various areas, especially in pollution and heavy pollution areas. The operating experience shows that in areas where composite insulators are used, the lightning flashover rate is greatly reduced. These products have high tensile strength, good antifouling performance, and are easy to install and resist collision.

Request a Quote >

Characteristics Documents

The 11kv composite post insulator is suitable for use in various areas, especially in pollution and heavy pollution areas. The operating experience shows that in areas where composite insulators are used, the lightning flashover rate is greatly reduced. This 11kv insulator has high tensile strength, good antifouling performance, and are easy to install and resist collision.

Technical parameters

Product Type	Rated voltage kV	Rated tensile loading kN	Connection mark	Structura height mm	Insulation distance mm	Minimum nominal tailing distance mm	Lightning full wave impulse withstand voltage kVP	1 min power frequency wet withstand voltage kV	Equalizing ring diameter mm
FXBW4-5/70	1-5	70	16W	298±10	127	288	58	30
FXBW4-5/100	1-5	100	16W	298±10	127	288	58	30
FXBW4-5/70	1-5	70	16W	280±10	127	288	58	30
FXBW4-10/70	10	70	16W	365±10	180	500	95	60
FXBW4-10/100	10	100	16W	430±10	180	500	95	60
FXBW4-35/70	35	70	16W	640±10	489	1366	230	95
FXBW4-35/100	35	100	16W	680±10	489	1366	230	95
FXBW4-66/70	66	70	16W	885±15	716	2243	410	185
FXBW4-66/100	66	100	16W	925±15	716	2243	410	185
FXBW4-110/70	110	70	16W	1245±15	1093	3559	550	230	φ250
FXBW4-110/100	110	100	16W	1285±15	1093	3559	550	230	φ250
FXBW4-110/160	110	160	20R	1290±15	1093	3459	550	230	φ250
FXRW4-220/100	220	100	16W	2280 ±15	2082	7020	1000	395	φ300
FXBW4-220/160	220	160	20R	2280±15	2082	6870	1000	395	φ300
FXBW4-330/160	330	160	16W	3270±15	2950	9690	1425	570	φ400
FXBW4-330/160	330	160	20R	3160±15	2950	6900	1425	570	φ400
FXBW4-66/100T	66	100	16W	925±15	716	2343	410	185
FXBW4-110/100T	110	100	16W	1285±15	1093	3659	550	230	φ250
FXBW4-220/100T	220	100	16W	2280±15	2082	7120	1000	395	φ300

Note:

1 .The default rod-shaped suspension composite insulator has a standard ball head at both ends, and the nest structure is required. If need different connections, please note on the order.
2. Model attached T indicates that the first oversize umbrella skirt is ∅300，which has functions of preventing snow and bird droppings